
Resin bound paths.
Connect your gate, home and garden with a continuous aggregate finish. We assess the route, widths, levels and drainage around the people using it.
Access considered
The route and any changes in level are assessed before we recommend transitions, widths and gradients.
Defined edges
Edging defines the route and supports the surface.
Matches your drive
Use the same blend so path and drive tie together.
Resin bound examples by Atelier Kerb, including driveways and patios.















Beneath the finish
Preparation and drainage for this surface.
Paths need a suitable base, defined edges and considered connections to adjoining surfaces. We review the route, changes in level, drainage and access for construction before agreeing the scope.
- Width and gradients
- Edging both sides
- Drainage along narrow returns
- Access for excavation, deliveries and laying.
Construction guide
Beneath resin bound.
This resin driveway example uses open-grade Type 3 stone, open-grade capping, a resin-bound base and decorative wearing course. The complete system and drainage route are assessed together.
Illustrative arrangement, not a project specification. Product requirements, layer depths and drainage are confirmed in the written proposal; this does not establish suitability for your site.
Explore construction and drainage- Decorative wearing course — 18–20mm. The chosen decorative aggregate in resin, trowelled to an even, permeable finish — the layer you see.
- Resin-bound base — 30–35mm. A coarser resin-bound layer that gives the driveway its strength and lets water drain through.
- Capping layer (open grade) — 2–6mm stone. An open-graded regulating layer that levels and stabilises the sub-base below.
- Open-grade sub-base (Type 3) — 175–250mm. 20/30mm open-grade stone compacted in layers to carry vehicle loads while letting water drain away.
- Ground (formation) — —. Checked for soft spots before anything is built on it.
Project visualiser
Explore your chosen finish.
Use your photograph to explore an illustrative colour guide, then confirm the material with physical samples.
Visualise Your ProjectKnow what happens next.
- 1.
Assess your site.
Tell us how you want the space to look and work. We review the existing surface, levels, drainage and access, and discuss suitable options.
- 2.
Agree your proposal.
Your written proposal explains the recommended construction, materials, scope and price, including allowances and anything still to confirm.
- 3.
Install and hand over.
We carry out the agreed work, review the finished project with you and explain the care and reopening guidance for your installation.
Understand what your price includes.
Your proposal brings preparation, supporting construction, materials and finishing details into one scope. It explains the work included, any allowances, exclusions and items that need further assessment.
If you want to explore a different budget, we can discuss the materials, detailing or extent of the project while keeping the preparation your site needs.
Resin Bound Paths questions.
Can you do a path on its own?+
Yes. Smaller jobs still have a site assessment, so the supporting construction can be agreed.

Let's plan your resin path.
Tell our Studio what you want to change. We'll discuss your priorities, review the site and explain the proposed work and price in writing.
Request Your Site AssessmentOr call our Studio on 07340 727425. We'll contact you to agree a visit time.
New to resin? Read the resin-bound surface guide or browse more advice.






