
Resin bound driveways.
A continuous natural-stone finish, with colour and border options to suit your home. We assess the existing construction, vehicle use, levels and drainage before recommending the build-up beneath it.
Choose the appearance. Understand the construction.
Resin bound combines aggregate with resin to form a trowelled surface. Explore blends against your brickwork, doors and edging, then confirm the specified products using physical samples. The retained base or new supporting construction must be suitable for the site and its use.
- Daltex Resin Bound
- Continuous finish
- Overlay or full reconstruction assessed
- Explore resin colour blends
Continuous finish
A continuous aggregate finish, with levels and transitions planned around how you use the driveway.
Explore resin colour blends
Compare natural aggregate blends, then confirm your choice with physical samples.
A finish to suit your home
Compare colours and edging against your house and garden, then confirm the materials with physical samples.
See the finish up close.
Explore completed Atelier Kerb installations in more detail, with footage of the finished surface, edging and thresholds.
Project walkthrough · Atelier Kerb footage
Resin bound driveway, walkthrough
Light sand resin bound surface with grey edge restraint
Project walkthrough · Atelier Kerb footage
Resin bound driveway, walkthrough
Hand-trowelled resin bound surface with a contrasting inlay band and charcoal block edging
Resin driveway details.















Beneath the finish
Preparation and drainage for this surface.
Your driveway needs support suited to the ground and expected vehicle use. We review the existing construction, levels, drainage and edge restraints, then explain the recommended route and any further investigation needed.
- Existing base: overlay or full reconstruction
- Where surface water will go
- Vehicle weight and turning areas
- Edges, thresholds and the damp-proof course
- Access for materials and waste
Construction guide
Beneath resin bound.
This resin driveway example uses open-grade Type 3 stone, open-grade capping, a resin-bound base and decorative wearing course. The complete system and drainage route are assessed together.
Illustrative arrangement, not a project specification. Product requirements, layer depths and drainage are confirmed in the written proposal; this does not establish suitability for your site.
Explore construction and drainage- Decorative wearing course — 18–20mm. The chosen decorative aggregate in resin, trowelled to an even, permeable finish — the layer you see.
- Resin-bound base — 30–35mm. A coarser resin-bound layer that gives the driveway its strength and lets water drain through.
- Capping layer (open grade) — 2–6mm stone. An open-graded regulating layer that levels and stabilises the sub-base below.
- Open-grade sub-base (Type 3) — 175–250mm. 20/30mm open-grade stone compacted in layers to carry vehicle loads while letting water drain away.
- Ground (formation) — —. Checked for soft spots before anything is built on it.
Project visualiser
Explore your chosen finish.
Use your photograph to explore an illustrative colour guide, then confirm the material with physical samples.
Visualise Your ProjectCost calculator
Understand your driveway budget.
Choose a surface and enter your area to see an indicative VAT-inclusive total. Add borders, covers, steps and retaining details in the full project builder.
For new resin construction, Atelier Kerb uses an open-grade Type 3 sub-base—not Type 1—with the supporting layers, drainage and edge restraints confirmed for the site.
Your indicative estimate
Loading…
Free driveway design
Driveway design is free. Construction is priced separately using your chosen surface and project details.
Final scope and price confirmed following site assessment. Drainage and project extras are assessed separately.
Know what happens next.
- 1.
Assess your site.
Tell us how you want the space to look and work. We review the existing surface, levels, drainage and access, and discuss suitable options.
- 2.
Agree your proposal.
Your written proposal explains the recommended construction, materials, scope and price, including allowances and anything still to confirm.
- 3.
Install and hand over.
We carry out the agreed work, review the finished project with you and explain the care and reopening guidance for your installation.
Understand what your price includes.
Your proposal brings preparation, supporting construction, materials and finishing details into one scope. It explains the work included, any allowances, exclusions and items that need further assessment.
If you want to explore a different budget, we can discuss the materials, detailing or extent of the project while keeping the preparation your site needs.
Resin Bound Driveways questions.
Can resin go over my existing drive?+
Only when the existing base is sound and suitable. We check this at your site assessment and explain which route is suitable.
Is resin bound permeable?+
Resin bound can let water pass through. For the whole driveway to drain through, the supporting layers and ground must also allow it. Dan reviews the complete construction and water route at assessment.
How long does it take to lay?+
Your proposal sets out the preparation and laying sequence for your site. Weather and the specified materials affect installation and curing; we confirm pedestrian access and vehicle reopening for your particular installation.

Let's plan your resin driveway.
Tell Dan what you want to change. We'll discuss your priorities, review the site and explain the proposed work and price in writing.
Request Your Site AssessmentOr call Dan on 07340 727425. We'll contact you to agree a visit time.
New to resin? Read the resin-bound surface guide or browse more advice.






