Resin Bound by Atelier Kerb

Resin bound surfacing for driveways, patios and paths.

Explore a coordinated aggregate finish around your home. The colour connects the spaces; the construction is specified for how each area will be used.

About Resin Bound

A finish supported by the right build-up.

A resin surface does not establish the suitability or permeability of the whole construction. We assess the layers below, the ground, levels and drainage before specifying the system.

  • Daltex Resin Bound
  • Continuous finish
  • Drainage planned with the complete construction
  • Explore resin colour blends

Resin driveways

Consider vehicle use, turning movements, retained construction and drainage alongside your chosen blend.

Resin patios

Create a continuous finish for seating areas, with thresholds, edges and water routes considered together.

Resin paths

Connect the driveway, house and garden with a finish that can coordinate with adjoining areas.

Is resin bound right for you?

Pros

  • Continuous finish with no loose stones
  • Can be permeable with a suitable complete construction
  • Choice of natural colour blends
  • Routine sweeping and cleaning

Considerations

  • Needs a sound base underneath — we check this first
  • Best laid in dry weather
  • Compare the complete construction and finish, not the surface rate alone

Our resin bound installations.

Resin bound driveway with contrasting banding
Resin bound driveway with contrasting banding
Resin bound driveway beside a landscaped frontage
Resin bound driveway beside a landscaped frontage
Resin driveway entrance
Resin driveway entrance
Curved resin garden pathway
Curved resin garden pathway
Resin garden patio
Resin garden patio
Resin entrance steps
Resin entrance steps
Resin surface detail
Resin surface detail
Resin bound driveway
Resin bound driveway
Resin driveway with block border, curing
Resin driveway with block border, curing
Mixed-tone resin driveway with kerb edge
Mixed-tone resin driveway with kerb edge
Resin side path with kerb edge
Resin side path with kerb edge
Resin side path, finished surface
Resin side path, finished surface
Completed resin bound driveway with a Tobermore Kerb Large (KL) border at a house in Elworth, Sandbach
Completed resin bound driveway with a Tobermore Kerb Large (KL) border at a house in Elworth, Sandbach
Close-up of the resin bound driveway surface in Elworth
Close-up of the resin bound driveway surface in Elworth
Resin bound patio with a Tobermore Kerb Large (KL) border at the rear of the Elworth house
Resin bound patio with a Tobermore Kerb Large (KL) border at the rear of the Elworth house

Beneath the finish

Preparation and drainage for this surface.

We review ground conditions, levels, drainage, loading and access for every project. The materials and construction are then specified for the chosen surface and its intended use.

  • Existing construction: overlay or full reconstruction
  • Base type and depth specified for the area's use
  • Drainage route and ground permeability
  • Levels at doors, thresholds and damp-proof course
  • Edges, kerbs and chambers

Construction guide

Beneath resin bound.

This resin driveway example uses open-grade Type 3 stone, open-grade capping, a resin-bound base and decorative wearing course. The complete system and drainage route are assessed together.

Illustrative arrangement, not a project specification. Product requirements, layer depths and drainage are confirmed in the written proposal; this does not establish suitability for your site.

Explore construction and drainage
Edges need a firm restraint — kerbs, setts or a suitable existing edge — so the resin finish stays crisp.
  1. Decorative wearing course — 18–20mm. The chosen decorative aggregate in resin, trowelled to an even, permeable finish — the layer you see.
  2. Resin-bound base — 30–35mm. A coarser resin-bound layer that gives the driveway its strength and lets water drain through.
  3. Capping layer (open grade) — 2–6mm stone. An open-graded regulating layer that levels and stabilises the sub-base below.
  4. Open-grade sub-base (Type 3) — 175–250mm. 20/30mm open-grade stone compacted in layers to carry vehicle loads while letting water drain away.
  5. Ground (formation) — —. Checked for soft spots before anything is built on it.
Maintenance

Looking after your surface.

RoutineSweep regularly+

Regular sweeping keeps leaves and dirt off the surface.

CleaningFollow the guidance for your installed system.+

Ask which cleaning method, pressure and products are suitable before treating the surface.

As neededSpot clean spills+

Wipe up oil or fuel quickly with warm soapy water to avoid staining.

Project visualiser

Explore your chosen finish.

Use your photograph to explore an illustrative colour guide, then confirm the material with physical samples.

Visualise Your Project

Know what happens next.

  1. 1.

    Assess your site.

    Tell us how you want the space to look and work. We review the existing surface, levels, drainage and access, and discuss suitable options.

  2. 2.

    Agree your proposal.

    Your written proposal explains the recommended construction, materials, scope and price, including allowances and anything still to confirm.

  3. 3.

    Install and hand over.

    We carry out the agreed work, review the finished project with you and explain the care and reopening guidance for your installation.

Understand what your price includes.

Your proposal brings preparation, supporting construction, materials and finishing details into one scope. It explains the work included, any allowances, exclusions and items that need further assessment.

If you want to explore a different budget, we can discuss the materials, detailing or extent of the project while keeping the preparation your site needs.

Resin Bound questions.

What is a resin bound driveway?+

A mix of UV-stable polyurethane resin and natural, kiln-dried aggregate, hand-trowelled onto a prepared base. The result is a continuous surface that can be permeable over a suitable complete construction. Follow the care guidance for your installed system.

Can resin go over my existing drive?+

Sometimes. It depends on the condition of what is there now. We assess the base and tell you honestly whether an overlay or full reconstruction is right.

How long does it last?+

A stable base, suitable resin and aggregate, planned drainage and care support long-term performance. Your specification records the proposed system, and your handover guidance explains cleaning and when to use the surface. Any workmanship cover and separate manufacturer warranties are identified with their terms in your proposal; no lifespan is assumed from the finish alone.

Completed resin driveway with contrasting border and a brick house

Discuss your resin project with Dan.

Tell Dan what you want to change. We'll discuss your priorities, review the site and explain the proposed work and price in writing.

Request Your Site Assessment

Or call Dan on 07340 727425. We'll contact you to agree a visit time.

Call DanGet a quote